Rover volts per RPM

Discussion in 'Rover Series Wind Generators' started by Minnesota, Apr 24, 2012.

  1. Minnesota

    Minnesota WindyNation Engineer

    Any info on the Rover volts per RPM? We are looking for a small PMA with low volts per RPM, on the order of 0.1 like the 750 has. The 750's is 0.093, btw.

    Also, is it Y-connected and what is the ohms between a pair of wires? Thanks.
     
  2. windyguru

    windyguru WindyNation Expert

    It is Y connected. I will measure the ohms. I cannot remember what it was when I measure it.

    I am going to get the Rover in the test stand in the next month or so .... the mount on the test stand is getting re-worked because it flexes too much.
     
  3. Minnesota

    Minnesota WindyNation Engineer

    I know of an opportunity to sell possibly 500 over the next 2 years, but I need data ASAP. Thanks.
     
  4. windyguru

    windyguru WindyNation Expert

    I will get you the volts/rpm and ohms tomorrow night.
     
  5. windyguru

    windyguru WindyNation Expert

    About 5VDC at about 53 rpm. Ballpark measurement.

    phase to phase resistance is 2.3 ohms.
     
  6. Minnesota

    Minnesota WindyNation Engineer

    Thanks.
     

Share This Page