Bridge Rectifier Specifications

Discussion in 'Bridge Rectifiers' started by WindyFAQ, Jul 4, 2011.

  1. WindyFAQ

    WindyFAQ WindyNation FAQ Staff Member

    In our micro hydro generator system of 5KW 380V 7.5A Generator ac power, I want to convert generated ac to dc to connect to a grid tie inverter.

    Can I use 35A 3 phase bridge rectifier? Please provide the specifications of the unit.
    If the generated power is 300V 7A, what will be the output dc voltage?
     
    WindyFAQ, Jul 4, 2011
    #1
  2. windyguru

    windyguru WindyNation Expert

    Although there is not much current, the generator is producing a lot of Watts (5000 Watts). I would recommend our 80 amp bridge rectifier.

    You will need a grid tie inverter that accepts DC voltage in ~380 volt range if that is what your generator produces.
     
    windyguru, Jul 4, 2011
    #2
  3. WindyFAQ

    WindyFAQ WindyNation FAQ Staff Member

    What is the DC output voltage of the 80A Bridge Rectifier?
     
    WindyFAQ, Jul 23, 2011
    #3
  4. windyguru

    windyguru WindyNation Expert

    This depends on the AC input voltage.
     
    windyguru, Jul 24, 2011
    #4
  5. WindyFAQ

    WindyFAQ WindyNation FAQ Staff Member

    Can you provide a AC voltage IN versus DC voltage OUT reference/spec?
     
    WindyFAQ, Jun 7, 2012
    #5

Share This Page