Recent Content by Dean-o

  1. Dean-o
    Post

    The Use of the New Micro 1000w wind inverter grid tie

    One more note to add: I did run a SunG wind 250 in parallel to my battery bank with a diode to keep the Sung from drawing juice from the battery...
    Post by: Dean-o, Nov 27, 2015 in forum: Connecting to the Grid
  2. Dean-o
    Post

    The Use of the New Micro 1000w wind inverter grid tie

    Thanks Tom, That's what I was thinking. I currently am running my turbine with a 24v battery bank and Outback inverter. The pros: Backup power...
    Post by: Dean-o, Nov 27, 2015 in forum: Connecting to the Grid
  3. Dean-o
    Thread

    The Use of the New Micro 1000w wind inverter grid tie

    Has anyone used, or had any luck with the new 1000w wind grid tie inverter AC110v DC15-30v for wind turbine that you see on Ebay? I see there are...
    Thread by: Dean-o, Nov 26, 2015, 4 replies, in forum: Connecting to the Grid
  4. Dean-o
    Post

    Leamy Electric grid tie wind system

    Thanks Tom, that is what I am looking for, a disconnect switch, what type should I get and where would be the best place to find one? I think...
    Post by: Dean-o, Feb 21, 2014 in forum: Wiring Methods
  5. Dean-o
    Post

    Leamy Electric grid tie wind system

    Tom, Are the voltages adjustable on these 1pcs Soild State Relay SSR-10 DD DC-DC 10A 3-32VDC/5-60VDC Or do they auto disconnect at 32v? I am...
    Post by: Dean-o, Feb 18, 2014 in forum: Wiring Methods
  6. Dean-o
    Post

    SunGTI for wind is in fault mode

    After much research, I found that one of the four Mosfets on the AC side of the board was bad. $2.45 and a little solder knowledge later and the...
    Post by: Dean-o, Jul 21, 2012 in forum: Connecting to the Grid
  7. Dean-o
    Thread

    SunGTI for wind is in fault mode

    My SunG for wind is currently stuck in Fault mode, are there any known fixes for this. I tried the disconnect theory, didn't work, checked the...
    Thread by: Dean-o, Jun 21, 2012, 7 replies, in forum: Connecting to the Grid
  8. Dean-o
    Post

    Smart Meters....Utility

    I recently had a smart meter put in. I asked why they would need a new meter and told me it was more user friendly for those with alternative...
    Post by: Dean-o, Jun 13, 2012 in forum: Start here
  9. Dean-o
    Post

    Some grid-tie questions and in particular Sun-G Wind rated

    Timber, I recently added a 300 watt wind rated Sun G 10.8-30v. in parallel to my Outback 2524. This setup is working out great! I am seeing...
    Post by: Dean-o, Apr 29, 2012 in forum: Connecting to the Grid
  10. Dean-o
    Post

    SUN-600G directly to battery bank?

    Just an update. I recently installed the 300w GTI the way Leamy had suggested. Today the winds are varying between 10 and 18 mph. I am watching...
    Post by: Dean-o, Mar 19, 2012 in forum: Connecting to the Grid
  11. Dean-o
    Post

    SUN-600G directly to battery bank?

    Thanks Leamy, I really appreciate all your help. I will go with the 300w gti. I will post performance after the new gti is installed.
    Post by: Dean-o, Mar 8, 2012 in forum: Connecting to the Grid